2013 AISTech Conference Proceedings
2D Blast Furnace Top Gas Temperature Measurement System - SOMA
A 3D Thermomechanical Software for Continuous Casting Simulation
A Consideration of Medium Voltage Substation Primary Applications
A Fluid Flow and Steel Intermixing Study of a Round Billet Mold
A New Generation of Roll Gap Lubrication for Hot Strip Mills
A Novel Concept for Improving Slab Casting Performance Using Mould Thermal Analysis
A Novel Data-Driven Prediction Model for BOF Endpoint
A Review of Benchmark Performance in Plate Mill Process Control
A Review on Stamped Charging of Coals
A Rolling Model for the Three-Roll Rolling Process
A Semi-Analytical Solution of Von Kaman Rolling Equation with Roll Indentation - Part II
A Semi-Analytical Solution of Von Karman Rolling Equation With Infinitely Rigid Rolls - Part I
A Study of an Improved Overhead Crane Wheel Flange Lubrication System
A Thermodynamic Model and Database for Oxysulfide Inclusions Containing Ca-Mn-Si-Al-O-S
Accommodating Iron-to-Carbon Interface Issues in the Blast Furnace Hearth
Achieving Operational Safety on Ladle Stirring With Automatic Gas Couplings
Advanced Blowing and Stirring Conditions in the BOF Process
Advanced Mould Level Control Technologies for DANIELI Slab and Thin Slab Casters
Advanced SEM Methodology for Tracking Reoxidation in the Tundish
Advanced Simulation of Mold Flow Influenced by Static and Moving Magnetic Fields
Advanced Stoves Operation at voestalpine Stahl Donawitz With SIMETAL BF Vairon
Advanced Strategies for Cooling for High-Strength Heavy Plate Production
Advances in Reusing & Recycling Steelmaking Refractories
An Overview of Steel Cleanliness From an Industry Perspective
An Unsupervised Clustering Approach for Yield Stress Prediction During Flat Rolling
Analyses of Phase Formation and Its Effect on the Thermal Resistance of Mold Flux
Analysis for 321 Stainless Steel Plate Flaws and Related Quality Improving Plan
Analysis of Splash Data From Oxygen Steelmaking
Application and Practice of Ceramic Fiber Block Technology in Industrial Furnaces
Application of a Mercury Variance Plan of Study: A Case Study
Application of DynaGap Soft Reduction to High-Quality Blooms and Billets
Application of the Blast Furnace Shaft CFD Simulator
ASIS Aluminum Injection Technology – Reduced Aluminum Consumption for Primary Deoxidation
Automatic Ingot Mold Cleaning and Its Value for Ingot Casting
Automation Control System for Different Solutions of Modern Roughing Mill
Barcode Identification of Pipes and Tubes
Benefits of EAF Bottom Gas Purging Systems
BF Process Technology Enhanced by Charging Control, Process Monitoring and Mathematic Models
Blast Furnace Value-in-Use Model and Its Application for Iron Ore Processing
Brazilian Potential of Biogas Use as Fuels in Metallurgy: Process, Management and Costs
Breakthrough Technology for Real-Time Water Detection in EAF Steelmaking
Bulging and Waving – Difficult Challenges for Automatic Mold Level Control
Case Study of Degas Vessel Pivot Bearing Using Slow Speed Vibration Monitoring for Condition
Centrifugally Cast High Speed Steel Rolls for Cold Rolling
CFD Modeling of a Flooded Disc Scrubber
Challenges of Integration between MES and ERP Systems in the Steel Industry
Characteristics of Non-Metallic Inclusions in Non-Oriented Electrical Steels
Characterization of Sinter Plant Emissions
ChatterBlock® – Siemens VAI’s Solutions for Vibration Detection, Prediction, Analysis and Control
Circular Pelletizing Technology – A Revolutionary Solution
Co-Injection of Pulverized Coal and Natural Gas on IH7 Blast Furnace
Coke Size and Shape Characterisation for Bed Permeability Estimation
Coke Wet Quenching Moisture Reduction Aid
Cold Finishing Chain Track Technology -- Pushing the Limits of Coil-to-Bar Drawing
Combining Static and Dynamic Testing — Preventing a Motor Catastrophe
Compact Design of High-Performance Skip Hoist
Comparison Between Somes Process for Production of Hot Metal
Comparison of Different Systems of Hot Blast Stoves
Comparison of Three Approaches to Study Inclusions in Al-Si Deoxidized Steel and Al-killed S
Computational Fluid Dynamic (CFD) Modeling for Hood Design
Constraint-Modified Charpy-Sized Fracture Toughness Specimen for Line Pipe Testing
Continuous Improvement of Mold Life at Severstal Columbus
Continuous Pickling Line Process Efficiency -- Achievements at Arvedi
Control of Ca-Containing Inclusions in Al-Killed Steel Grades
Control of Plate Thermomechanical Properties Using MULPIC® Plate Cooling Technology
Correct Torque Limitation and Driveline Optimization
Correction of Matrix Effects on Microanalysis of Calcium Aluminate Inclusions
Corrosion Behaviors of Nb Heavy Rail in Simulated Industrial Atmosphere
Curse to Cure – The Utilization of Titanium-Bearing Products in Blast Furnace Ironmaking
Danieli BOF Converter Technology
DC EAF Modernization With Siemens Metals Technologies Fin-Type Anode
Design and Application of Advanced Semi-Automated Ingot Teeming Systems
Design and Implementation of Camera Link Interface System for Steel Surface Defect Inspection
Design Improvement and Repair of Internal Combustion Chamber Stoves
Determination of the Intrinsic Value of Ore-Based Metallics
Development and Application of a Remelt Method for Rapid Collection and Observation of Inclusions
Development and Application of an Endpoint Control (EPC) Model for an Open-Hood Converter
Development and Application of Blast Furnace Burden Surface Profile Visualization Technology
Development and Application of Discrete Element Charging Burden Model for Blast Furnace
Development of a Scrap Management Program at Çolako?lu Metalurji
Development of an Inclusion Characterization Methodology for Improving Steel Product Cleanliness
Development of Channeling Prediction System for a Blast Furnace
Development of Improving Surface Qualities by Jet Spray Technology
Development of Materials for the Making of Rolling-Mill Rolls for Hot-Strip Mills
Development of Plate Mill Roll Grades
Development of the Direct Evacuation Control System for Modern Electric Arc Furnace
Dither, a Necessary Evil – Phase 2
Dry Slag Granulation - The Environmentally Friendly Way to Making Cement
EAF Heat Recovery down to 200°C – A New Benchmark
Effect of an Optimized Impact Pad on Molten Steel Quality in a 4-Strand Delta-Shaped Tundish
Effect of Blow Parameters in the Jet Penetration by Physical Model of BOF Converter
Effect of Blow Parameters in the Mixing Time Using Physical Model of BOF Converter
Effect of Ce Addition on the Formation Behavior of Inclusions in Stainless Steel Melt
Effect of Electromagnetic Braking (EMBr) on Turbulent Flow in Continuous Casting
Effect of Flux Composition on Desulfurization Reaction Rate of Molten Steel
Effect of Hydrogen on Mold Heat Removal at a Rounds Caster
Effect of Mg Deoxidation on Solidification Structure in 430 Ferritic Stainless Steel
Effect of Oxygen on the Interfacial Tension of Liquid Fe
Effect of Process Design and Operation on the Thermal and Microstructure and Mechanical Properties
Effect of Rare Earth Oxides in Plain Carbon Steels
Effect of Silicon and Furnace Conditions on Hot Shortness
Effect of Submerged Entry Nozzle Design on the Distribution of Inclusions in Cast Pro
Effective Energy Utilization at the NCE Coke Plant in Japan
Effects of Dezincification on Continuous Caster Spray Nozzle Assemblies
Effects of Port Geometries on Fluid Flow Patterns in Slab Moulds
Efficient Production and Enhanced Quality in Plate Rolling
Efficient Strip Cooling to Meet Requirements of Advanced Steel Grades
Efforts for Cooling Water Saving in a Steelmaking Facility
Electric Arc Furnace Process Optimization at ArcelorMittal Point Lisas
Electrical Protection HMIs for Metals Applications Utilizing the IEC 61850 Protocol
Electrical Safety Myths and Misconceptions
Eliminating Bottom-Side Surface Scratches at the ArcelorMittal Burns Harbor 80-Inch Hot Strip Mill
Endpoint Prediction Technology of BOF Based on Flame Information
Enhanced Capture of Mercury in Baghouse by Using Novel Filtration Media and Filter Design
Evaluation of BOF Slag Applied in Foaming Practice
Evaluation of Operating Reactance to have Optimum Utilization of Electrical Power in EAF
Evaluation of Using Tire Waste Into Charcoal or Coke Blast Furnaces
Evolution of Secondary Inclusions During Electroslag Remelting Process
EVRAZ Claymont Steel Pusher Reheat Furnace 100% Oxy-Fuel Conversion
Extending the Life of Existing Switchgear
Fall Prevention Systems for Flatbed Trailers
Finite Element Analysis (FEA) Applied to Hot Blast System Design
Flow Control Refractory Design Optimization of Submerged-Entry Nozzles by Simulation Technology
Formation of Protective Layers of High Strength the Crucible of Wear in Blast Furnace
Fracture Mechanics-Based Acceptance Criteria of CVC Rolls of Hot Strip Mill
Fundamental Evaluation of Natural Gas Co-injection With Coke Oven Gas or Coal
Fundamentals for the Formation of Mg-Al-Ti-O Compound Inclusions in Steel
Green Technologies for Higher Energy Efficiency in Electric Steelmaking
Guidelines for Selecting Pellet Plant Technology
HD Mold – A New Fiber-Optic-Based Mold Monitoring System
HD Mold – Caster Assistance System to Increase Product Quality
High-Performance MgO-C Bricks for BOF: From Now to Nanotechnology
How Changes in Scrap Mix Affect the Operation of Consteel® EAF
How to Use Automation to Improve Productivity and Quality in Your Rolling Mill
Impact of Cokemaking Technology on a Steel Plant’s Carbon Footprint
Importance of Control Strategy for Oxy-Fuel Burners in a Steel Reheat Furnace
Improvement in Billets Weighing Accuracy
Improvement of the Sampling Methodology for the Cleanliness Measurement in the Liquid Steel Stage
Inclusion Characterization and Cleanliness Assessment for High-Strength, Low-Alloy Steels
Inclusion Control Model in the Ladle Metallurgy Furnace
Inclusion Determination in Steel
Inclusion Engineering and the Metallurgy of Calcium Treatment
Inclusions and Their Behavior in Ultrahigh-Strength Steels
Increasing Mill Production by Using Medium Voltage AC drive and Active VAR Compensation
Indefinite Chill Work Roll Microstructure Influence on Eddy Current Test Response
Industrial Robots Safety: Study of Innovative Approach for Safer Workplace
Influences on Bulk Density and Its Effect on Coke Quality and Internal Gas Pressure
Initial Alumina Formation: Some Additional Thoughts Based on Laboratory and Steel Plant Findings
Innovation in Shipping Steel Pipe
Innovative Approach to Apple Platform-Based HMI and Level 2 Systems
Innovative Approach to Industrial Lighting
Interfacial Layer Formation in a Zn-23Al-0.3Si Galvanizing Bath
Introducing the BOF Blowing Process Model – A Tool for Practice Improvement
Inventory Management System for Slab Tracking
Investigation of Analytical Stability of Quadrupole Mass Spectrometer in Decarburization Application
Investigation of Different Equipment Setups for Ammonia Wash and Desulfurization
Kinetic Model to Predict the Change in Chemical Composition of Inclusions During Ladle Treatment
Ladle Gate Design and Its Effect on Automation
Laser Alignment of United States Steel Corporation’s Gary Works No. 2 Caster
Latest Developments in Magnesia-Carbon Bricks for Modern Electric Arc Furnaces
Latest Mini-Mill Experiences - Focus On Performance
Latest Solutions in Cold Rolling Which Count
Latest Solutions in Cold Rolling Which Count
Leveraging Engineering Data Management to Improve Capital Projects
Low-Cost Offgas Combustion Enhancement to Improve Fume/Heat Control System Performance
Low-Cost Scrap Does Not Low-Cost Steel Make
Lubrication in the Cold Rolling Process Described by a 3D Stribeck Curve
Medium Voltage Protection, Control and Automation Utilizing IEC 61850
Meltshop Baghouse Fan Blade Upgrade Project
Meltshop Yield and Heat Size Improvements at ArcelorMittal Indiana Harbor - Long Carbon
Metallurgical Behavior of the Ultrathick-Slab Continuous Casting Mould
Metallurgical Properties of the BRE and Their Utilization in Metallurgy
Microstructural Characterization of Grey Iron
Minimum Quantity Roll-Gap Lubrication System — Field of Large Potential to Reduce Your OPEX
Model for Real-Time Prediction of Cohesive Zone Shape and Location Inside Blast Furnace
Model Studies on Slag Metal Entrainment in Gas-Stirred Ladles
Modern Blast Furnace Gas Cleaning – A Report of State-of-the-Art Technology
Modernization and Energy Efficiency of HPH Bell-Type Annealing Plants
Mold Slag Entrainment Mechanisms in Continuous Casting Molds
Morphology, Soundness and Segregation Improvement of Bloom Castings by Using Swirling Flow Nozzle
Most Modern SBQ Production Technology
Multivariable Shape Actuation Capabilities Envelopes of Vertical-Stack Mills
New Approaches for Maintenance Grounding in Medium-Voltage Switchgear
New Control System Technology for Cold Rolling Mills
New Developments for Roll Shops
New Generation Mold Flux Feeder
New Grade of Material With Improved Wear Resistance for Finishing Stands in Universal Mill
New Refractories and Nanotechnology: Challenges of Carbon-Based Nanomaterials for Steelmaking
New Rolling Stands for Long Products Rolling Mills
Next-Generation EAF Optimization at ArcelorMittal Dofasco Inc.
Next-Generation Eddy Current Technology for Roll Inspection Systems
Next-Generation Manufacturing Execution Systems
No-Bell Top Proves Its Reliability in Service
Novel Advanced Control for Tandem Hot Metal Sheet Rolling
NOx Sources and Production in a Consteel Electric Arc Furnace
Numerical EAF Oscillation Model and Operational Validation
Numerical Simulation of the Co-Injection of Natural Gas and Pulverized Coal in Blast Furnace
Observation of Gamma-Delta-Liquid Interface in Selected Low Carbon Steel Grades by CSLM
Optimization of a Cold Mill Rolling Oil for Grain-Oriented Electrical Steel
Optimization of Grade Transitions at the Caster
Optimized Energy Management and Planning Tools for the Iron and Steel Industry
Optimizing Hydraulic Descaler Performance through Improved Monitoring and Maintenance
Over-Voltage Transients in the Secondary Side of EAF Transformers
Phosphorus Removal in Oxygen Steelmaking: A Comparison Between Plant and Laboratory Data
Position and Camber Measurement in the Hot Rolling Process: EMG hotCAM
Precision Grouting: Skid-Mounted Equipment
Predictive Model for Blending Coking Coals, Part 1: Western Canadian Coals
Preparing Your Electrical System for Disaster Recovery
Process Development of a New DRI Technology for Oolitic Iron Ores
Process Model for Hot Rolling Mills
Process Optimisation Model for FeMn and SiMn Production
Production of a Sustainable Resource by Using a Microwave
Productivity Benefits in the Electrical Steelmaking Process by Means of Reactive Power Compensation
Pulling the Four Levers of Reliability in a Continuous Caster Operation
QTB Plus, Theory and Application of a New Method for Production of Reinforcing Steel
Quality Improvement of Billet for Wire Rods
Real-Time Torque Monitoring at North Star BlueScope Steel
Reduction of Iron Oxide (Fe2O3) Using a Blend of Waste Plastics and Biomass as a Reducing Agent
Regenerative Firing vs. Oxy Fuel Firing: An Applications Approach
Reheat Process Control Using Three-Dimensional Thermal Slab Model
Relationship Between CSR/CRI and Coal Properties via Principal Component Analysis Approach
Remanufacturing of Continuous Slab Caster Bearings
Removal of Non-Metallic Inclusions From Liquid Steel by Electromagnetic Field
Repair of Mill Stand Geometry by Resin Technology
Repower of the Nucor Decatur Tandem Cold Mill
Requirements on Automated Manifest Flatness Measurement
Retrofitting Coke Oven Pressure Control Without Stopping Production
Roll Bite Lubrication, Roll Wear, Scale Reduction, Lubricant Application
Roller Alignment Device - Maintenance Tool for Continuous Casting
Rolling and Processing Techniques for the Production of High Strength-Steel Plates
Safe and Productive Electric Arc Furnaces
Secondary Refining Optimization by applying Ar-gas Bottom Bubbling Auto-Control System
Setting New Standards in Operator Safety and Product Quality
Shape Performance Improvements at ArcelorMittal 80-Inch Burns Harbor Hot Strip Mill
Siemens VAI Continuous Slab Casting Technology
Simulation of an Industrial Tangentially Fired Boiler Firing Metallurgical Gases
Slag Splashing Practices and Basic Oxygen Furnace Lining Recommendations
Slidegate Dithering Effects on Transient Flow and Mold Level Fluctuations
Some Ignored Aspects During Melt Transfer From Ladle to Tundish
Sorting Out the Hazards of Anhydrous Taphole Clays
State-of- the-Art Beam Blank and Bloom Casting
Steel Plates Made of Hot Band as an Economic Alternative to Plate Mill Products
Stopper Rod Dithering Trials at ArcelorMittal Dofasco's No. 1 Continuous Caster
Stopper Rod Mechanisms and Their Influence to Mold Level Stability
Strategic Planning for Desulphurization in Integrated Steel Plants
Studies of Microporous Polymeric Lubricants in the Steel Industry
Study of Elevated Temperature Mechanical Properties of Steel
Study of Microstructure for Chromium-Free Passivating Coatings on Hot-Dipped Galvanized Steel
Study of Strip Tension of Coiling Wide Heavy-Gauge Strip
Study On Cooling Uniformity for the Accelerated Cooling Process in Hot Rolled Steel Plate
Surface Quality Control by Automated Surface Inspection System
Systematic KOBM Process Control Based on Off Gas Information
Taper Wheels Should Not Be on EOT Cranes!
Technology and Achievements in Wire Rod Production Reducing CAPEX and OPEX - Facts and Experiences
Tenova Regenerative Flameless Burners on California Steel Industries’ New Walking Beam Furnace
The Behavior of Inclusion Components in High-Aluminium and High-Silicon Steels
The Benefits of Intelligent Motor Control in the Metals Making Process
The Best Way to Blow-In of Blast Furnace: Definition, Philosophy, Theory and Practical Approach
The Calderon Unique Process for Making Direct Iron and Steel
The Development of Water Based Lubricants for the Production of Seamless Pipe
The Development of X120 Line Pipe Steel Hot Rolled Coil
The Effect of Heating Rate on AlN Formation in High Aluminum Content Fe-Al Alloys
The Effects of Fluid Flow on Flux Entrainment in a Square Billet Mold
The Effects of Inclusions on Fatigue Performance of Steel Alloys
The Impact of Titanium on Skull Formation in the Blast Furnace Hearth
The Improvements of the Coal Moisture Control System in Cokemaking Plant
The New Continuous Casting Machine at ArcelorMittal Temirtau (Kazakhstan)
The New Optical Speedometer for Continuous Casters - SM3200
The Petrography of Metallurgical Coke
Thermal Model of Heat Transfer in Coke Oven Furnace
Torpedo Ladle Positioning System Using Artificial Vision System
Transport Director - Complete Mill Simulation, Ghost Rolling and Optimized Mill Sequencing Control
Tundish Design at Steel Dynamics Butler Flat Rolled Division for Improved Steel Cleanliness
Unique Filter Design for Heavy Industry Cooling Water
Upgrade of the Burns Harbor Plate Mill Heat Treat Facility
Upgrade to Fourth Generation of Thin-Slab Caster
Use of Hot Briquetted Iron Made From Low-Grade Iron Ore Pellets in a Blast Furnace
Use of Self-Recuperative Burners in Roller Hearth Furnaces on Thin-Slab Rolling Mills
Wastewater Treatment for the Coke Oven Batteries at U. S. Steel Canada Hamilton Works
WAVE Mold for Billet Casting Applications
X-Pact® Energy Advisor: More Effective Production With Reduced Energy Consumption
Yield Enhancement During Continuous Casting Process at Severstal Columbus
Yield Material Improving Strategy and Thickness at 2-Stand Cold Reversing Mill The Marcegaglia Case