2010 AISTech Conference Proceedings
30 Million In the Hearth of Blast Furnace No 5 at AHMSA Mexico
A Lean Supply Chain Manufacturing Model
A Method for Roll Alignment By Means of Inertial Technology Using PARALIGN®
A Multi-Faceted Approach to Reducing Electricity Costs in the Steel Industry
A Nondestructive Inspection System for Measuring Mechanical-technological Properties of Steel Grades
A Novel Steady-state Technique for Measuring the Heat Extracted by Secondary Cooling Sprays
A Study on Supersonic Coherent Jet Characteristics Using Computational Fluid Dynamics
A Targeted Approach to Optimizing a Plate Mill
Achieving Carbon-free Emissions via the ENERGIRON DR Process
Advanced and Reliable Drive Systems for the Rolling Mill Industry
Advanced Inside-furnace Monitoring Techniques Implemented on the New Large Blast Furnace of Shagang
Advanced Revamping Solutions for Long Product Casting
Advanced Technologies for Skin Passing of Stainless Steel and Carbon Steel
Advances in Bearing Reclamation
AHMSA’S Blast Furnace No. 4 Operation With Low-grade Raw Materials for Highest Productivity
An Industrial Power System Management for High-quality Uninterrupted Power Supply at Tata Steel
Analysis of the Economy and Emissions of Blast Furnace Operation with Top Gas Recycling
Analysis of Ti-, Mg-, and Zr-bearing Inclusions in Ultra-low and Low Carbon Steels
Application of an Intelligent Centralized Lubrication System In the Iron and Steel Industry
Application of New Coke Oven Battery Technologies on the World Market
ArcelorMittal Dofasco #2 Blast Furnace Stove Repairs
Arvedi ESP (Endless Strip Production) First Thin Slab Endless Casting and Rolling Results
Asymmetrical Power Control of AC-EAFs by Structure-Borne Sound Evaluation
Automated Material Tracking via RFID Technologies
Avoiding Sloppy BOS Process Behavior
Bar Width Change in Finishing Stands of the Hot Strip Mill
BOF Gas Cleaning: 2nd Generation of Dry-type ESP and Hydro Hybrid Filter Technology
Brick Rubble Removal from the Base of an On-line Battery Stack at ArcelorMittal Dofasco
Burden Descending and Redistribution in a Blast Furnace
Care and Maintenance of Hydraulic Fluids
Cash for Clunkers in the Reheat Furnace World
CFD Simulation of Co-Injection of Plastic Particles and Oil into a Blast Furnace Raceway
Characterization of the State of LKAB Experimental BF Hearth
Chemical Removal of Internal Scale From HCl Pickle Liquor Pipeline
CIVS - Center for Innovation through Visualization and Simulation
Clean and Efficient – Optimization of EAF Dedusting Systems
Coke Oven Gas Desulfurization – State of the art
Comparison of Byproduct and Heat-recovery Cokemaking Technologies
Danieli Maintenance Management System
Decreasing MTTR using Split Seal Technology
Description of a Simulation Method for Evaluating the Thermal Properties of
Detection of Internal Defects Prior to Value-added Processes to Minimize Final
Development of a Comprehensive Model for Oxygen Steelmaking
Development of a Virtual Reality Blast Furnace Package Using CFD
Development of Nano-size Precipitation Strengthening Hot-rolled Automobile Steels
Development of Self-braking Nozzle for Steel Slab Continuous Casting Process
Developments and Results at TenarisDalmine, Italy
Developments on a Web-based Metal Technology and Metal Information Network
Direct Injection of Biofuel in Blast Furnace Ironmaking
Don’t Let Your Money Go Up the Chimney
Drive Selection for Rolling Mills
EAF Foamy Slag in Stainless Steel Production: Industrial Experiences and Further Development
EAF Optimization: Efficient Use of Energy in the Electric Arc Furnace
Easy Access To Everything - or How the Web Can Bring It All Together
Eddy-free Tuyeres for a Blast Furnace
Effect of Blending Rangal Coal on High-temperature Behavior of Cokes
Effect of Cerium on the Inoculation of Acicular Ferrite in Hot-rolled Fe-Mn-Al-Si-C Steel
Effect of Ladle Shroud Alignment on Steel Quality in a Four-strand, Delta-shaped, Tundish
Effect of Melting and Casting Parameters on the Hot Ductility Behavior of Nb-bearing
Effects of Continuous Cast Section Size on the Torsional Fatigue of 1050 Steel
Effects of FC Mold on Slab and Final Product Qualities at Low Throughputs
EFFICIENT'COOLANT'REMOVAL'FROM'METAL'STRIP'ON'COLD'MILL'/'TEMPER' MILL
Electric Arc Furnace Tap Changers
Entrapment of Inclusions in Continuous Casting Billet: Industrial Observation and Modeling
Environmental Benefits of Natural Gas Direct Reduction
Factors to Consider in the Selection of a Mill Grease
Fault Tolerant SVC ArcComp System for DC Arc Furnaces
Fine Grain Practice - Revisited
Fit for the Future by Modernization – Latest Solutions for Tandem Cold Mills
Flue Gas Flow Optimization for Energy Efficiency and Clean Operations in Integrated Steel Plants
Formation of an Impromptu EAF Process Team at CMC Steel Texas
Graphical Tool for Bottleneck Identification and Productivity Improvements in Galvanizing Lines
Heat Recovery for the EAF of Georgsmarienhütte, Germany
High Conductivity Copper in the Blast Furnace
Highly Durable Refractory Slide Nozzle Plate for Continuous Casting of Steel
HSS Work Rolls for Hot Mill Finishing Stands :
Hybrid DC-DC-AC Main Drive for ILVA, Taranto Finishing Mill
HYDROGEN AND NITROGEN CONTROL AND BREAKOUT WARNING MODEL FOR CASTING NONDEGASSED STEEL
Implementation Experience of DANIELI-CQE at Hot Strip Mill
Improvement in Strip Temperature Control for High-strength Steel in a Radiant Tube Furnace
Improvement of Wire Rods Processing Technology
Improving Centerline Segregation Control on X70 Products
Improving Ladle Stir Reliability and Service Life Using New Design Purge Plug
In Process Measurement of Organic Coating Thickness Using a Full Spectrum Infrared Sensor
Inauguration of IRIS, Institute of Research of Iron and Steel, for Sha Steel in China
Increasing Casting Speed without Mold Level Hunting Risk
Increasing the Refractory Wear Profile Control on the Steel Ladles at the V&M do Brazil
Influence of Wall Surface Unevenness on Coke-pushing Force
Innovative Design of New Laser Based Thickness Gauges for Inline Measurement of Strip Thickness
Innovative Drop-in Sensor System at Essar Steel Algoma
Innovative Methods for Integrating Utility and Production Automation Systems
Integrated New Downstream Facilities at Acciaieria Arvedi, Italy
Intercritically Austempered Steel
Interpretation of UT and EC Results in Roll Testing
Investigation Into an HSM Finishing Stand Defect which Generated FeO Type Lamination
Investigation of Related Factors of Blast Furnace Slag Fluidity and Its Application
Ironmaking Technology Selection for Site Specific Conditions
JSW Steel No.3 Blast Furnace: An Introduction to India’s Largest Blast Furnace
Kinetics of Reduction of FeO in EAF Steelmaking Slag by Metallurgical Coke and Waste Plastics Blends
Line Differential Protection Systems Using Low-power Current Sensors Applied to EAF Circuits
Low-cost Hot Metal: the Future of Blast Furnace Ironmaking
Lowering Exhaust Gas Losses and Emissions with Newly Developed Recuperative and Regenerative Burners
Manufacturing and Characteristics of Modern Silica Brick Material for Coke Ovens
Maximized Asset Reliability and Performance Connected to PDA Inspection
Microalloy Precipitation in Hot Charged Slabs
Mill Level 2 Model in Improvement of Product Quality and Productivity
Mitigation of Triboelectric Charging in Industrial Hydraulic and Lubricating Fluids- Case Studies in
Modern Process Models to Improve Product Quality on Plate Mills
Modernization of Hot Strip Mills – Concepts, Implementations and Results
Modernization of the Heavy-plate Rolling Mill at Dongkuk
Mold Flow Modeling of ArcelorMittal Riverdale and POSCO Thin Slab Casters
Mold Technology for the Future
Near-net-shape Casting of Steel - Belt Casting Technology
New Approaches to Meltshop Offgas Heat Recovery
New Developments in Drive Trains for Roughing and Plate mills
New Electrolytic Tinning Line and Tin Free Steel Line for BAOSTEEL, China
New Process and Application for Biogas in Metallurgy (1)
New Zinc Recovery Process from EAF Dust by Lime Addition
Novel Polyalkylene Glycol Based Hydraulic Fluids
Nozzle Design for ArcelorMittal Dofasco’s No. 1 Continuous Caster for Minimizing Sliver Defects
Numerical Investigation and Optimization of a Venturi Scrubber
Numerical Modeling of Scrap Heating by Burners
On-line Monitoring of the Ladle Stirring
One Year Casting Experience for Rounds of High-quality Steel Grades at the Nucor Memphis
Optimization of a Submerged Entry Nozzle Design to Reduce Non-metallic Inclusions in Line Pipe Steel
Optimization of Offgas System Performance at Hamilton Specialty Bar
Optimization of Surface Quality through Mold Thermal Monitoring
Optimization Results at Ferriere Nord Using EFSOP® Technology
Optimized Material Flow in Plate Plants by Integration of Scheduling and Warehouse Management
Optimizing Indirect Production Cost
Oscillation Measurement and Multiphase Flow Simulation of the AOD Process
Process Integration as a Tool for Decision-makers in the Steel Industry
Production Improvement of No. 2 BOSP at ESAI
Production of Fine Grained As-rolled Structural Plate Steels
Productivity Optimization at Duferco Farrell’s 60 Hot Strip Mill
Project Management Models for Long Product Rolling Mills
Proven Practice and Future Prospects of Blast Furnace Reductant Injection
Quality Improvement in Bloom for SBC Steel
Quality Performance Report Improves Mill Operation
Quench and Tempering: An Unfamiliar Process in North America
Quick Direct Tap at United States Steel Corporation’s Gary Works Q-BOP Shop
Radiation Protection — An Investment for the Future
Rating Inclusions in an As-cast Carbon Steel
Raw Materials for Blast Furnace
Recent Steel Research at the Department of Ferrous Metallurgy of RWTH Aachen University
Recovery of Phosphorus and Manganese from Steelmaking Slag
Reducing Carbon Footprints with Green Hot Mill Lubricants
Reducing Refractory Cost Using New Al2O3-SiC-C Bricks for Hot Iron Transport
Reduction of Blast Furnace Ironmaking Carbon Footprint through Process Integration
Regulatory Impact on Diesel Engine Emissions
Requirements on Standard Tests of Radial Shafts Seals for the Heavy Industry
REVAMPING MES AND L3 SYSTEMS IN THE IRON & STEEL INDUSTRY
Robotic Solutions for EAF — First Performance Review
Role of the Industrial Engineer in Today’s Steel Producing Environment
Rotary Seals for Heavy-duty Applications – Technology Meets Customer Requirements
Running Your Maintenance Department as a Business
Severstal L-Blast Furnace Hearth Refractories Findings and Repair at Sparrows Point
Shape Improvement in Cut-to-length Line with an In-line Quarto Skinpass Mill
SIMETAL Corex Prepared for Present and Future Ironmaking Challenges
Simulation of Strip Lateral Dynamics on Continuous Processing Lines
Single Charge EAF Modification: Installation and Experience
SIROLL CM- Upgrading of Cold Rolling Tandem Mills to Continuous Operation
SIROLL HM Work-roll Lubrication for Electrical Energy Reduction and Strip Surface Improvement
Slab Caster Revamping – The Approach to Excel in the Market
Solidification and Dendrite Growth of Stainless Steel during Continuous Casting
SPUN CAST SEMI-HSS ROLLS IN A COLD MILL APPLICATIONS
Start-up and Results of the EAF Consteel® Plant of Celsa Nordic — Mo I Rana (Norway)
STATCOM for Powerful Flicker Reduction from Electric Arc Furnace Operation
Staying Ahead of the Curve – Beating the Commissioning Schedule for Continuous Slab Casters
Steel Degassing Operations Using Mechanical Vacuum Pump Systems
Steel Liquidus Temperature Estimation From Thermodynamic Calculations
Steel Mills: Energy Costs and the Green Planet
Strategic Demolition Impact Analysis – A Plan for Ageing Infrastructure
Strategies for Flexible Hot Mill Modernizations -
Strategies for Use of Superheated Steam During Stainless Steel Refining in Converters
Strip Cleanliness, Extracting New Data From the Rolling Oil TGA Burn-off Curve
Study of the Use of Steel Industry Fuel on Coking Operations
SYNCHRONOUS AND INDUCTION MOTORS FOR MAIN DRIVE APPLICATIONS
Taking Batch Annealing Optimization to the Next Level
Tenova FlexyTech® Regenerative Flameless Burners
Tenova FlexyTech® TRGX Burner Modeling and Testing
The 750,000 stpy SBQ Rolling Mill, Part of the Complete Minimill at Nucor Steel Memphis Inc., USA
The ArCOS Furnace Automation Concept - Much More than a Simple Electrode Control System
The Effect of Hydrogen on Mold Heat Removal in Continuous Casting
The Future of Hot Blast Stoves
The Gimbal Top Goes On Line A New Era For Blast Furnace Charging
The Influence of Temperature and Aluminum Content on Galvannealed Coating
The McGill Metals Processing Centre; A University-Industry Partnership for Process Metallurgy
The McMaster Steel Research Centre, A Model for Industry-University Collaboration
The Mill Revamping of Chubu Steel Plate
The Nature of Internal Defects in Continuously Cast Steel and their Impact on Final Product Quality
The New TATA Steel “H” Blast Furnace: Design Concept, Project Development and Operating Results
The Plate Mill as a Metallurgical Tool
The Sophisticated Air Mist Nozzle for Secondary Cooling of the Continuous Caster
Thermal Efficiency Optimization of the Hot Stove System
Thermodynamic Modeling of the CaF2 Containing Slags and Its Applications to Steelmaking Process
Thermodynamic Modeling to Improve Foamy Slag Practice in the EAF
Time Based Scheduling System For Steelmaking and Continuous Casting Production
Totally Controlled Safety System with Zero Impact on Productivity for a Bar Rolling Mill
Tuyere Life Improvements and Operating Enhancements on Great Lakes B-2 Blast Furnace
Two Hundred Years of Rolling on the Brandywine
Ultra-low NOx Flat Flame Burner Application for Steel Reheat Furnaces
United States Steel Corporation Fairfield Works Coal Grinding Facility
Use of High Chrome Rolls in Cold Mills
Utilization of Non-DR Grade / BF Grade Low Fe Pellets for Direct Reduction and Melting Application
Value Creation Through R&D at ArcelorMittal
Vapor Pressure Measurements of Zinc and Lead Chlorides from Slag System
VIP 08 Flatness Measurement System
Waste Gas Cooling Plants with Evaporation Cooling
Water Modeling of Stirring and Braking Processes in a Slab Caster Mold
Water Treatment Chemistry Impact on CSP Mill Product Quality and Production Rate
Work Roll Temperature and Thermal Crown Measurement to Improve Roll Cooling Efficiency
World-class Crane and Runway System for the 21st Century
Your Employees Use Fall Protection, but Are They Really Safe From Harm?