2007 AISTech Conference Proceedings
3D Sprays Dynamic Secondary Cooling with Continuous Spray Width Adjustment
4 Secrets to Building a Successful Reliability Program
A Determinative Responsibility Model for Weather Delay Analysis by Fuzzy Logic
A New Large Bloom Caster for High Grade Steel at Pohang Works of POSCO
Advantageous Numerical Simulation of the Converter Blowing Process
Air/Oil Advantages and Disadvantages
Algorithms for Dimension Measurement of Hot Rolled Steel Products using CCD Camera
Application of Acoustic Emission Techniques to Condition Monitoring within the Steel Industry
Application of CFD Modeling to the Design of Fume Control Systems in the Steel Industry
Application of Furnace Automation System
Application of Thermographic Slag Detection System in Baosteel
Applications and Advancements for Vacuum Degassing
Applications of Automatic Screen Filters in the U. S. Steel Industry
Automatic Combustion Control of the CSTˆs Coke Oven Batteries
Automatic Inspection of Surface Quality in Modern Roll Grinding Machines
Automatic Surface Inspection as a Productivity Tool for Hot and Cold Mill Shops
Bar Code Identification of Hot Mill Products
Basic Slag Generation in Steelmaking Processes with Special Reference to the BOF
Behavior of Spitting during Blowing in BOF
Blast Furnace Bottom and Hearth - Expansion Considerations
Blast Furnace Cooling The North American Experience
Blast Furnace Dust Characterization from the Dust Catcher and Some Experiments for Its Use
BOF Post Combustion Oxygen Lances as a Production and Maintenance Tool
Calculation of Coke Replacement Ratio
Calculation of the Peritectic Range for Steel Alloys
Caster Steel Yield Improvement by Enhanced Ladle Bottom Design
CFD Analysis on Behavior of Slag - Steel Interface in an Argon Gas Stirred Ladle
Charge Optimization In EAF Steelmaking - Recent Developments
Chemical Interpretation of Tuyere Drill Cores from the Ruukki Blast Furnaces - Coke and Fines
Clarification of the Mechanism of Aluminothermic Reduction of MgO
Coke Oven Gas Condensate Hazardous Waste Issues
Combustion of Organic Waste Materials for Their Utilization in EAF Steelmaking
Computer Modeling of Blast Furnace Raceway Formation Kinetics
Continuous Casting Technologies of Stainless Steel At POSCO Stainless Steelmaking Plant
Continuous Success of DC EAF Power Supplies
Control of Chromium Slagging in Stainless Steel Production at EAF
Conversion of Finishing Roll Stand from Grease Lubrication to Oil/Air
Countermeasures Against On-line Defects in Continuous Casting of GA Auto Steels
CST Arcelor Brasil HSM Tail-end Crashing Reduction Using Six Sigma Methodology
CST Arcelor Brasil No. 2 Blast Furnace - 10 Million Tons
Custom made Roll Shop Management Systems for Optimized Roll Organization
Dawes Lane Coke Ovens, Corus UK Recovery from Catastrophic Loss of Services
Definition of a New Parameter for Flatness Control in Hot Rolling Thin Metal Strip Production
Deriving Quality Improvement Using Automated Surface Intelligence SystemsTM
Design and Operation of a Gimbal Top Charging System
Design, Installation and Operation of the Nucor Auburn Electric Arc Furnace Replacement
Detection of Mold Events Using Thermocouple Measurements
Development of an online moisture measuring system for a sinter plant
Development of Lance Clamping Device for BOF at Rourkela Steel Plant of SAIL
Development of Ultra-Thin Cast Strip Products by the CASTRIP® Process
Devolatilization and Cracking Behaviour of Australian Lumpy Coals at High Temperatures
Drive and Automation System for Thachin Steel-Thailand New Bar Mill
Dynamic Soft Reduction of Continuously Cast Slabs
EAF Energy and Material Balance Modeling
Eco Pickled Surface: An Environmentally Advantageous Alternative to Conventional Acid Pickling
Economic Production on Bar and Wire Rod Mills
Effect of Coal Pre-treating Technology on Coke Strength
Effect of Iron-bearing Minerals on Gasification Behaviour of Coke
Efficient Blast Furnace Cooling for a Long Campaign
Elastohydrodynamic Lubrication in Rolling Geometries
EPA’s Urban Air Toxics Strategy and Minimills
Evaluation and Suitability of MgO-C Refractory for RH Degasser Lower Vessel Application
Every Project is a New Invention of the Future
Evolution of Rolling Parameters for Hot Rolled Non-Oriented Electrical Steel
Evolution of the EAF Gunning Practices
Experiences Implementing the Smart Furnace Control System
Experimental Probing of Temperatures in Blast Furnace Tuyeres
Fine Charcoal Agglomeration and its Feasibility for Blast Furnace and Energy Generation
Fluid Flow Effect on Inclusion Removal in a Tundish with a Swirling Ladle Shroud
Foaming Slag in more dimensions A new detection method with carbon control
Gas Cleaning Systems in Ironmaking Blast Furnaces
Gas stirred ladle: Multi-phase-species mathematical model
Gasification and the MIDREX® Direct Reduction Process
Getting More Steel from Less Hot Metal at Ternium Siderar Steel Plant
Getting the Best of Both Worlds in Reversing Mill Recoilers at Nucor Steel-Berkeley
Hi-QIP, a New Iron-making Process
High Productivity Slab Casting of Peritectic Steel Grades
High-temperature Performance of Al2O3-SiO2-SiC-C Refractory While Using Al and BN Additives
High-temperature Shaftless Hot Air Stoves with Long Service Life for Blast Furnaces
Hot Band Profile Irregularities Related to Thermal Contour of Work Roll
Hot Mill Furnace Optimization with Beta Planner for Optimal Mill Scheduling
How Do You Mend a Broken Hearth?
Implementation of a Supply Chain Optimization System at a Plate Producer
Implementation of Surface Inspection Technology on Noisy Surfaces
IMPOC®: Online Mechanical Properties Measurement - Reducing Processing and Material Problems
Improvement in Performance of the Tapping System at Port Talbot Steelworks
Improvements to porous plug system at SDI, Butler
Improving the System Life of Basic Oxygen and Electric Arc Furnace Hoods, Roofs and Side Vents
Influence of Coal Blend and Charging on the Productivity of the Ruukki Coke Ovens
Influence of Different Additions on the Behavior of Mold Fluxes
Influence of Structure and Parameters of a Machine on Its Technical Productivity
Innovative Methods and Probe for Continuously Measuring Liquid Steel Temperature and Slag Thickness
Innovative solution minimizing the thickness variations in cold rolling
Innovative Solutions for Differential Protection of Electric Arc Furnace Transformers
Integrated Process Director: a real-time integration between EAF fumes and injection
Investigating Galvanneal Reactions on Pot Hardware Materials
Investigating Mould Heat Transfer in Thin Slab Casting with CON1D
Investigation on Nozzle Clogging during Steel Billet Continuous Casting Process
Kinetic Model of Nitrogen during AOD Refining Process of Stainless Steel
Large PWM Inverters for Rolling Mills
Laser Off-Gas Analysis with Closed Loop Control Improves EAF Optimization
Latest Design Aspects of the AOD Steelmaking Converter
Life Cycle Greenhouse Gas Emission Comparison of Steel Products with Other Materials
Main Drive Power Supply Interactions with the Power System
Maintenance at Mini Mills Effective, But Also Efficient?
Managing Tar and Liquor Quality
Measured Residual Stresses in Large Steel Rolling Components
Mechanism and Intensity of Zinc coatings layer formation by Electromagnetic Hot Dip Zinc Galvanizing
Medium-Thick-Slab Casting Technology Bridging the Gap Between Conventional and Thin-Slab Casting
Meeting Coal Quality Challenges for Global Coke Demand: A Supplier’s Perspective
MEROS® Sinter Off-gas Cleaning Meeting Future Environmental Demands Now!
Metallurgical assessment of two HSS rolls grades for Hot Strip Mill
Method for Development of New Steel Grades
Micromagnetic Testing for Rolled Steel
Model based evaluation of sustainability indicators in integrated steelmaking: A Swedish case study
Model Of Radial Distributions In The Blast Furnace Shaft
Model of Thermal-Fluid Flow in the Meniscus Region During An Oscillation Cycle
Modernization of a 50 Year Old Heavy Plate Mill at Erdemir
Modification of Reheat Furnace Practices through Comprehensive Process Modeling
MoldExpert 2.0 — New and Improved Features for Mold Monitoring
Monitoring Ladle Eye Dynamics using Multivariate Statistical Methods
New Application to Improve Shear Cut Cycle Control
New Blast Furnace Hearth Erosion Computer Model Development and Application at U. S. Steel
New challenge in the casthouse operation at Thyssen Krupp Steel
New Developments and the Versatility of High-Hardness Nickel-Alloy Coatings for Mold Liners
New Strong Strand Stirrer Boosting Quality for Ferritic Stainless Steel
New Welding Technology for Banding Machines at the Nucor Steel - Berkeley - Beam Mill
Novel Industrial Trials Demonstrating The Use Of Plastics For EAF Slag Foaming
Numerical Analysis on the Coke Combustion Inside Raceway
Numerical Simulation of Coal Combustion in the Raceway under Different Injection Conditions
Numerical Study of Pulverized Coal Injection with Natural Gas Co-Injection in a Blast Furnace
Observations on Mold Corner Temperatures Measured using Thermocouples
Oil Film Thickness Measurement Online
On The Concept of “Permanent Lining” for the Prolongation of Blast Furnace Campaign Life
Online Fault Analysis of DC Motors
Online Roughness Measurement in a Coil Line
Optimization of Slab Centerline Quality Using Dynamic Soft Reduction
Optimizing Heat Recovery Coke Plant Siting
Pelletizing and Pellet Quality at Cleveland-Cliffs Operations
Pig Iron Nuggets: How Good Are They?
PIZO Furnace Demonstration Operation for Processing EAF Dust
Prediction of the Inner Profile of a Blast Furnace Hearth
Preventing EAF’s Transformers Failures
QCM’S Direct Reduction Grade Pellet Quality Development
Quantitative Determination of Phase Fractions in a Galvannealed Coating Using XRD Spectrum
Rapid Process Troubleshooting in Steel Production
Recycling Ladle Slag as Slag Former for EAF Steelmaking A Study of Foaming Behavior
Reduction Kinetics of Coarse Hematite in Pressurized Fluidized Beds
Reline and Upgrading of ROGESA Blast Furnace No. 4 in 2003
Remote Machinery Monitoring at Nucor Hickman
Repair of a BOF Trunnion Ring and Llamellas Units at Ternium Siderar Plant
Replacement of the No. 1 Coke Plant Quench Tower at Dofasco
Review of Coreless Coating Pots and Galvannealing Technology
Roll and Overlay Technologies to Improve Operational Performance
Roll Grinding Products and Techniques for Reducing Grinding Costs
Secondary Dedusting Systems with High-Performance Gas Cooling and Explosion-Proof Design
SeqiOlivine Improves the Sintering and Pelletizing Performance of Iron Ore
Siemens VAI Ultimate EAF - Various Operational Results
Siemens VAI’S Fully Integrated Hot-Strip Mill For the Production of High-Strength Steel
Siemens VAl Mini Mili Technology - Next Generation Long Product Plant Performance
Simulation for the Dynamic Behavior of Strips Running on Hot Run-Out Tables
Simulation of Austenite Grain Growth in Continuous Casting
Simulation of the Hearth Draining Process and Thermal Stress of a BF Hearth
Sintering Properties of Marra Mamba Iron Ores
Slab surface optimization utilizing fixed minimum negative strip time
Solutions for Dusts and Sludges From the BOF Process
Sponge Iron - Utilizations Of High Ash Coal and Poor Quality Iron Ore For Making Quality Sponge Iron
Spout and Eye Formation on the Bath Surface in Ladle Metallurgy Practice
State-of-the-Art Abrasive Cutting Machines to Improve the Operation of Modern Rolling Mills
Steel coil lifting using synthetic slings ´with Dyneema®’: Reliable, Economic, Safe
Steel Degassing Vacuum Systems - Operation, Design and Maintenance Considerations
Sterling Steel Improves Asset Performance and Maintenance Effectiveness - A Case Study
Stirring strategies to meet highest metallurgical requirements in the BOF process
Successful Slab Caster Design For Wide Slabs
Sunsetting: A Solution Framework to Revamp and Integrate the Level-2 Process Control Software
Sustainability by having Zero Accidents and Zero Down Time
Sustainable Compliance with Clean Bulk Solids Handling
Tangshan Guofeng 1450 mm Hot Strip Mill (P. R. China) Start Up and First Operational Results
Technology to Produce Low-activation Steel for the Reduction of Radioactive Waste
Ternium-Siderar Blast Furnace # 2: End of Campaign
The Effect Of Aluminum On Isothermal Oxidation Resistance Of Austenitic Heat Resistant Steels
The 2006 Reline of Corus IJmuiden Blast Furnace No. 7
The Control of Blast Furnace Operations through Tuyere Practice Based on RAFT or HTR
The Envirolube air grease lubrication system
The Fluid Dynamics of Air-Mists used for the Secondary Cooling of Thin Slabs
The Influence of Some Key Casting Parameters on Surface and Internal Quality of Slabs
The Leap to Reliability Excellence Where to Start and Where it Can Take You
The Mechanical Properties of High-strength Interstitial-free (IF) Steel for Automotive Applications
The Methods, Aims and Practices (MAP) for BOF Endpoint Control
The New Steelmaking Plant for SBQ Steels at Charter Steel, Cleveland, Ohio
The Number 2 Blast Furnace Casthouse at Dofasco
The Rise of the Non-Welded Hydraulic Piping System
The Rolling of Universal Channels at Nucor Steel, Jewett
The Theory And Practice Of Blast Furnace Hearth Management At Corus Scunthorpe
The Use of Steelmaking Slag for Mineralogical Sequestration of Carbon Dioxide - Aqueous Processing
The VM2 EAF Remote Scoreboard: Four Years of Experience
Theoretical and Practical Aspects of Lance Skulling and Slag Foaming in BOF Vessels
Timken Faircrest Radiation “It Could Happen To You”
Tools for Foaming Slag Operation at EAF Steelmaking
Train Transportation Coal Losses A Wind Tunnel Study
Tundish Sequence Increase Through the Reduction of Alumina Clogging Occurences
Turnkey Revamp of the LD (BOF) Steelmaking Plant at U. S. Steel Kosice, Slovakia
Under the Hook “A Closer Look”
Up-to-date Measurement Devices for Continuous Casters
Upgrade of the Kicks Reducing & Sizing Block (RSB) at Charter Steel Cleveland Division
Upgrading Legacy Level 2 Systems: Techniques and Trials
Upgrading of Highveld Electric Iron Furnaces to Partially Open Bath Smelting
Upgrading Stainless Steel Slags with Borate
Use of Dynamic Computer Simulation for Optimal Melt Shop Logistics
Using GIS Technology for Document and Asset Management
VAI-CON Tap The Missing Link in Converter Steelmaking
Validation of an Accurate and Rapid New Model for Strip Crown
Valve Stand Paranoid to Perception
Visibility Control of Main Stack Plume at CST Arcelor Brasil Sinter Plant: A Scientific Approach
VOC Treatment Technology at BET
Wasteload Allocation and TMDLs
Web-based data gathering, automatic reporting and schedule generation for coke plant automation.