2002 Steelmaking Proceedings
A Perspective Of Practicle Issues Relating To Tundish Development
Advanced Modeling Improves Efficiency Of Dofasco's Desulphurization Facility
Analysis Of Alumina Inclusions Behavior In Ladle Refining
Behavior During Preheating Of Stopper Rod And Sen
BOF Bath Level Measurement For Lance Height Control At The Sparrows Point Plant
Carbon Solubility In Steelmaking Slag
CFD Aided Design Of A Multiple-Strand Tundish
Comparison Of Heat Transfer Through Tundish Sprays And Dry Vibratable Tundish Linings During Casting
Consensus And Conflict In The Steel Market
Continuous Caster Mold Level Control Study
CSP - Concepts For Stainless Steel And The First CSP Production Plant At AST/Italy
Decarburization Of Low Carbon Steel Melts With C02-02 Under Vacuum
Development And Implementation Of BOF Slag Splashing At Rourkela Steel Plant
DOFASCO Cut Plan And Optimization Project Conception To Results
Dynamic Gap Control At Bethlehem's Sparrows Point Caster No. 1 - Technology And Operational Results
Elimination Of Ladle Fume Emissions
Elimination Of Surface Defects In Cold Rolled Extra Low Carbon Steel Sheet
Energy Recovery And BOS Stack Emission Reduction By Controlling The Combustion Of Waste Gas
EUROSTRIP - A Quantum Leap For Hot Band Production Via The Strip Casting Technology
Evaluation And Control Of Steel Cleanliness-Review
Experimental Study On The Spray Cooling Of High Temperature Metal Using Full Cone Industrial Sprays
Expert EAF Suite For Process Control Optimization
Fast Slab Quality Judgement By Means Of Fast Macro-Metallographic Laboratory
Heat Flux Calculations From Thermocouples-What Can Be Measured?
Imporvement Of The BOF Operation Using Fluxing Material Containing Fe-oxide And Silica
Improvement Of Energy Usage And Environmental Impacts In A Steel Plant
Influence Of AOD Practice On The Inclusion Defects On Cold Rolled Strips
Influence Of CaF2 On Viscosity And Structure Of Molten Slags
Interfacial Area In Top Blown Oxygen Steelmaking
Intermix Trials At The U.S. Steel Edgar Thomson Works Dual-Strand Caster
Is Globalization good For The North American Steel Industry?
Kinetic Study Of In-situ Si02 Reduction In Carbon-Bearing Refractories
Kinetics Of Alumina Dissolution In Molten Slags
Mathematical Modeling For RH Refining Process Of Molten Steel
Maximum Casting Speed For Continuous Cast Steel Billets Based On Sub-Mold Bulging Computation
Methodology For Metallographic Study Of Defects In Carbon Steel Long Products
Mold Crack Formation Of The Funnel Shaped Mold During Then Slap Casting
Mold Fluxes Fluoride Content, Some Technological Considerations
Mould Powder Selection Model For Continuous Casting
Mould Thermal Evaluation In A Slab Continuous Casting Machine
New Technology For Oxygen Introduction In The Electric Arc Furnaces
Nucleation And Growth Of Alumina Inclusions During Steel Deoxidation
Optimiazation Of Narrow-Face Water Slots Design For The Siderar Slab Casting Mold.
Optimization Of Production Process In Shougang No. 3 Steel Plant
Optimizing The BOF Scrap Charge At Bethlehem Steel's Sparrows Point Division
Phase Relations And Activity Measurements For The Al2O3-SiO2-TiOx System
Physical And Mathematical Models Of Gas-Liquid Dynamics In BOF Converters
Recovery Of Valuables And Stabilization Of Chrome(VI) In Stainless Steel Flue Dust Fines
Reducing Vessel Fume Losses And Recycling Of BOF Residuals
Solidification And Flow Behaviour Of Mould Fluxes
Sophisticated Monitoring Of Caster Turret Bearings And Structural Foundations
Study On Heat Diffusion Coefficient Of CC Mould Fluxes
The Chemical Wear Of The Sen-Slagline In The Continuous Casting Of Stainless Steels
The Operation And Maintenance Of A Continuous Tundish Temperature System
Thermodynamic Modeling For Deoxidation Control Of Steel In LMF
Thermodynamics Of Carbon In Liquid Ferromanganese Alloys
User Benefits Of Modern Air Mist Nozzle And Secondary Cooling System Tehcnology