2002 Mechanical Working Steel Processing Proceedings
3D Transient FEM Analysis Of Width Variation During Hot Rolling
Air Knife Coating In Hot-Dip Galvanizing
Al-Oxid Layer On Hot-Dip Galvanised Steel Sheet: Characterisation And Influence On Weldability
Analysis Of Strip Track-Off During Flat Rolling
Bi-Metallic Rolls Including High Speed Steel Work Rolls Made By ESS LM
Boiling Heat Transfer During Water Jet Impingement On A Run-Out Table
Carbide-Enhanced Graphitic Cast Iron For Finish Rolling Of Hot Strip - A Total Performance Survey
Causes Of Variation In Yield Strength In HSLA Strip Steels
Characterization Of Dual Phase Steels By Electron Backscattered Diffraction Techniques
Comparison Of Different Longitudinal Plug Tube Rolling Schemes
Control Of Roll Contour For Strip Profile And Flatness In Hot Rolling
Control Of Rolled In Scale Defects At Dofasco's Hot Strip Mill
CPC HSS Rolls For The Last Finishing Stands In Hot Strip Mills
CPC Roll Performance At Dofasco's 68-Inch Hot Mill
Current Trends For Cold Rolling Applications With HSS Rolls
Decarburization And Oxide Formation Minimization In Steel Reheating Furnaces
Deformation Behavior Of Ferritic Rolling And Improvement Of The Rolling Force Model
Determination Of Crash-Relevant Material Parameters By Dynamic Tensile Tests
Development And Application Of Forged Rolls For Cold Strip Mills
Development And Applications Of CPC Type High Speed Steel Roll For Cold Rolling
Development Of A Comperhensive Roll Inspection System
Development Of A High Performance Vacuum Rolling Mill
Development Of Galvannealing And Coating Weight Control System
Development Of High Order Phase Diagrams For Practical Applications In Galvanizing
Development Of Rolling Technique For Stainless Steel Seamless Pipe With Plug Mill Process
Development Of Spincast Hot Rolls Through Microstructural Optimization
Development Of Steel Matrix Composite For Forming Tools
Development Of The Predictive Type FF-AGC For Plate Rolling
Dross Formation And Control During Transitions From Galvannealing To Galvanizing
Dynamic Thermal Profile Development Of Work Rolls For IPSCO Steckel Mills
Effect Of Deforming High Temperature Phases On Hot Ductility In Microalloyed Steels
Effect Of Matrix/MnS Particle Interaction On Hot Workability Of S Free-Cutting Steels
Effective Tension Levelling Processes For Steel Strips
Effects Of Alloying On The Microstructure And Mechanical Properties Of High Strength Plate Steels
Effects Of Bearing Design On The Wear Of A Journal Bearing Sliding In Molten Zinc
Enhanced Hot Dip Galvanising By Controlled Oxidation In The Annealing Furnace
Environmental Improvements By Using Water-Based Synthetic Lubricants In Steel-Strip Rolling
Evolution Of Hot Rolling Mill Rolls With CPC Type High Speed Steel Rolls
Experimental Investigation And 3-D FEM Simulation Of The Process Of Rolling Of Bimetallic Rods
Factors Affecting Surface Friction Of Galvannealed Steel Sheet
Fatigue Behavior Of Advanced High Strength Steels For Automation Applications
Fatigue Of A Steel And Embrittlement By Liquid Metals
Fe Solubility In The Zn-Rich Corner Of The Zn-Al-Fe System For Use In Continuous Galvanizing
Finishing Mill Upgrade In High-Speed Mills
Finite Element Analysis Of Three Dimensional Strip Temperatures In Hot Strip Rolling
Flexible, Top Quality, Low Cost Rod And Bar Production
Friction And Surface Roughness In Hot Strip Rolling
Friction Measurement In Hot Rolling Of Steel
High Strain Rate Behavior Of Advanced High Strenght Steels For Automotive Applications
Influence Of Galvanneal Coating Structure On Press Formability
Influence Of Substrate Characteristics On The Inhibition Layer Breakdown and Galvannealing Kinetics
Integrated On-Line Work Roll Surface Observation At The Sidmar HSM
Integrated Process-Metallurgy Modeling: Example Of Precipitation During Coil Cooling
Inverse Engineering Approach In Selecting Process Parameters For Optimum Bar Rolling
Key Features In The Landscape Of Hot Dip Galvanizing
Metallurgical Aspect Of Multi-Component White Cast Irons For Hot Rolling Mill Roll
Microstructure Development In TRIP-Sheet Steels Containing Si, Al, and P
Microstructure Evolution During Annealing Of A Boron-Containing IF Steel
Modeling Of Austenite Decomposition In Advanced High Strength Steels During Run-Out Table Cooling
Modeling The Effects Of Alloying Elements On The Ferrite Formation Kinetics
Modelling Of The Cold Rolling Of Thin Strip With Lubrication By Finite Element Method
Modelling The Microstructural Evolution During Hot Strip Rolling
Modern Simulations Of Strip And Rod Hot Rolling
New Grade CPC Roll And A Centrifugal Cast HSS Roll With CPC Outer Shell Chemistries
Novel Strategies To Improve Properties Of Long Products
Numerical Analysis Of The Effect Of Temperature Variation On Flow In A Continuous Galvanizing Bath
On Modeling The Shape Chaqnges And Microstructural Evolution In The Steady State Rolling Process
On The Pickling Mechanisms Of Hot-Rolled Steel Strip
Oprimization Of Groove Design For Rolling Of Long Products
Particle Size And Composition Of Dross Particles From Galvanize And Galvanneal Operations
Possibilieties Of Mathematical Modelling Of Deformation Of Samples With Mushy Zone
Preduiction And Controlling Of Cracks In Metal Forming
Process Optimal Design In Tandem Cold Rolling By Genetic Algorithm
Progress And Prospect Of Steel Rolling Technique In China
Realization Of The U-Shaped Coiling Temperature Control On HSM Of Baosteel
Research On The Constitutive Equation Of Twin Roll Strip Casting Process
Retention And Deformation Characteristics Of Austenite In A TRIP Aided Hot Rolled Steel
Roll Grinding And Roll Texturing In Modern Fully Automatic Roll Shops
Silicon And Aluminium In Low Alloyed Trip-Steels
Solubility Products For VC and NbC in Baked Hardenable ULC Steels
Strip Profile Modeling Software Development For IPSCO Steckel Mills
Strip Shape Analysis In Cold Rolling
Study Of Metadynamic Recrystallization Phenomena In Coarse Grained Nb Microalloyed Austenite
Study On Backup Roll Contour Of Hot Strip Mills Based On Hybrid Genetic Algorithm
Study On Shifting Force Of Roll Axially Shifting Mills
Study On The Behaviors Of Profile And Flatness Control For Plate Mills
Super Flatness Analysis And Control System For Cold-Rolled Wide Strip Steel
The Application Of Simulated Annealing Algorithm To Improve Wear Models For Rolls In Plate Mills
The Cause Of Hardness Fluctuation For Hot Rolled Strip And Imporving Measurement
The Effect Of Market Demank And Operation Philosophy On The Productivity In A Bar And Wire Rod Mill
The Formation Of Craters Within Galvanneal Coating And Their Effects On Processing Properties
The Use Of EDT Textured Rolls In A Wide Range Of Applications
Three-Dimensional Simulation of Snake Motion In A Tandem Cold Mill
Using The Aspect Ratio Of Surface Void-Volumes To Quantify Surface-Topography Directionality
Variation Modeling For A Steel Cold-Rolling Stand Using Principle Component Regression