1998 Mechanical Working Steel Processing Proceedings
25th Anniversary Of The High Chrome Roll
A Detailed Study Of Sulphide Precipitation In Ti-IF Steels
Advanced Work Roll Cooling And Thermal Crown Control In The New Algoma Steel DSPC Finishing Mill
An Assessment Of The Application Of TiN Technology To Controlled-Rolled, Low-Carbon Nb - (V) Steels
Boron Hardenability Effects In 0.2 Percent Carbon Steels
Cage Forming Of Stainless Steel Pipe With High D/T Ratio
Casting New Light On Foundry Practices
Computer Aided Systems For Roll Pass Design Evaluation Applying Robust Design Techniques
Control For Taper Temperature Correction
Control Of Steel Surface Appearance After Painting
Development Of Materials For Back-Up Rolls
Digitization Of The Mill Roll Inspection Process
DST Experience In High Performance Linepipe And Flowlines For Sour Service
Effect of Minor Elements Addition On Galvannealing Behavior
Effect Of Phosphorus On The Hardenability Of Steel
Effect Of Thermomechanical Histroy On The Hot Ductility Of A Nb-Ti Microalloyed Steel
Effects Of Compostion And Processing Conditions In A 0.03%C-0.09%Nb X70 Linepipe Steel
Effects Of Sulfur And Manganese On The Hot Workability Of Austenitic Stainless Steels
Evaluation Of Friction Under Hot Rolling Conditions
Experiences Of Commissioning A Modern Wire Rod Mill
Fatigue Lifetime Prediction Model For Spot Welded Structures
Fracture Analysis Of Hot Mill Work Rolls
Fundamentals Of Softening Processes During Ferrite Hot Rolling
Going Common In A Global Market
High Strenght Sheet Steel Produced By An Internal Nitriding Process
Hot Strip Mill Work Roll Development
Hot-Dip Galvanized Products For Automotive Outer Panels
IF Steel Strengthening By Reactive Annealing: A Promising Route To Formable High Strength Steels
Improvement In Bending Crashworthiness Of Hat-Shape Columns By Using High Strenght Steel Sheets
Improvements In The Uniformity Of High Strength Automotive Sheet Steels
Industrial Development Of IF High Strenght Steels With And Without BH
Intercritical Rolling Of A Nb-Bearing Trip Steel
Interstitials In LC, ULC And IF Steels And Their Analysis
Investigation Into The Use Of Large-Drop Sprays For Hot Strip Rolling Mills
Materials For Production Of Tools For Seamless Tubemaking
Measurement On The Move; Non-Contact Gauging Of Tube Diameter And Shape
Mechanical Relaxation Of Residual Stresses In Induction Hardened Bars
Microstructural Engineering For Hard Turning
Microstructural Evolution Of Hot Rolled TRIP Steels During Cooling Control
Microstructure And Formability Of High-Strength TRIP-Aided Bainitic Sheet Steels
Modeling Flow Behaviours For Ferrite Rolling Of Two Ti-Nb IF Steels
New Approaches To The Design Of ULC Sheet Steels
New High - Strength Steels - Production, Properties & Applications
On DST Design And Production Of High Collapse Casing
Oregon Steel Mills 148 Combination Mill Utilizing Tippins CoilPlate Process
Performance Evaluation Of Prephosphated Galvannealed Steel Sheet
Predicting Residual Stress And Distortion In Steel Components Due To Heat Treatment
Press Forming Of Dual Phase High Strength Steels For Autobody Structural Members Parts
Processing And Properties Of A New Hot-Rolled High-Strength Fine-Grained Multi Phase Steel
Production Of Cold-Deformed Shaped And Extremely Thin-Walled Multilayered Tubes
Properties Of A Newly Developed Galvannealed Steel Sheet With Ni-bas Inorganic Lubricant File
Properties Of Hot Strip Mill Rolls And Rolling
Recent Experiences On Manufacturing Process Of Large Diameter Seamless Pipes At Dalmine Works
Reducing The Cost Of A Roll Grinder Installation
Reduction Of Rolling Mill Vibration Through The Use Of Expandable Housing Liners
Refractory Design And Installation For Rotary And Reheat Furnaces
Rod Mill Improvements For Increased Profitability
Rolls From Ukraine: Yesterday. Today. Tomorrow.
Sleeve Caster Start-Up And Product Development
Specific Forming Limit Curves For Tailored Blanks
SRM Technology For Tube Welding Lines
Start-up Of The Montpelier Mill
Stretch Reducing And Precision Sizing In Seamless Tube Mills
Study Of Mechanical Properties And Precipitation In High Strenght IF Steels
Study Of The Kinetics Of Dissolution, Coarsening And Growth Of Aluminum Nitride In Low Carbon Steels
Surface Effects Of Galvanized Coating On Corrosion In Polluted Environment
Texture And Microstructure Gradients In A Cold Rolled Electrical Steel
The Atlas Of Formability: A Tool For Process Improvement
The Bake-Hardening Steels For Automotive Outer Body Panels. Correlation Between The BH Measurement
The Development Of A Roll Purchase Specification For Forged Steel Rolls
The Development Of An Integrated Vibration Monitoring And Analysis System
The Effect Of Mo In Si-Mn Nb Bearing TRIP Steels
The Effect Of Prior Microstructure On The Fatigue Of Induction Hardened AISI-1050 Steel
The Effects Of Flow Stress On The Dent Performance Of Sheet Steels
The Grain Boundary Segregation of P, B, C and Nb In ULC Steels
The VAI Galvannealing Controller - Technology, Experience, Benefits
TRIP Steels With Reduced Si Content
Ultrasonic Testing In A Seamless Pipe Mill
Use Of Lubricants And Emulsions During Hot Rolling Of Carbon Steel