1997 Steelmaking Proceedings

A System for Interpretation of Blast Furnace Stockrod Measurements

An Accelerated Start-up of USS/Kobe's Vacuum Tank Degasser

Analysis of Thermal and Mechanical Behavior of Copper Molds during Continuous Casting of Steel Slabs

Application of EMBR for the Control of Molten Steel Flow in the Continuous Casting Mold

Behavior of Argon Bubbles during Continuous Casting of Steel

Break-Up of Liquid Drops Impacting on the Surface of Immiscible Liquids

Bubbling in a Tundish

CC Process Optimization Through an Improved Thermal Modeling of the Cast Steel Products

Clogging of the Submerged Entry Nozzle During the Casting of Titanium Bearing Stainless Steels

Computerized System For Caster Roll Management And Performance Tracking

Continuous Steelmaking: The Balance Between Intensity and Refining

Control of DWI Steel Cleanness by Lanthanum Tracing of Deoxidation Inclusions, Ladle Slag Treatment and a Methodical Approach

CSP Plant Start-up at Steel Dynamics Inc.

Desulfurisation for Thin Slab Casting

Developing Slag Control Practices at AC

Development of Computer Control System for the RH Degasser at POSCO Pohang Works

Development of Technology for Producing Ultra Low Sulphur Stee by RH Powder for Top Blowing Method

Enhancing Hot Mill Slab Yield, Usage and Throughput using Expert Systems and Numerical Optimization

Equipment for Shotcasting TM Steel Ladles

Full Scale Water Modeling of Fluid Flow Phenomena in a Continuous Caster Mold During Start-Up Conditions

Heat Transfer Behavior of Pure Iron and Nickel against a Water Cooled Copper Mold During Initial Stage of Solidlfication

High Power In-mold Electromagnetic Stirrer - Improvement of Surface Defects and Inclusion Control

Hydrochloric Acid Pickling of Coiled Steel Rods

Implementation of a Ladle Slag Oxygen Activity Sensor to Optimize Ladle Slag Practices at the U. S. Steel Mon Valley Works

Improved Steel Ladle Practice Under a Performance Based Refractory Supply Agreement

Improvement of RH Refining Technology for Production of Ultra-Low Carbon Steel at Kwangyang Works, POSCO

Improvement of Secondary Cooling Control by On-Line Temperature Calculation

Improvement of the Productivity at KSC's Mizushima Works by Enlarging the Heat Size

Improving Productivity and Quality Through Control of the Steel Temperature in the Tundish

Increasing BOF Production Without A Large Capital Investment

Innovative and Cost-Effective Techniques for Extending Ladle Life

Innovative Clogging Prevention and Mold Flow Optimization by the Whirl SEN

Installation and Start-up of Slag Splashing at Algoma Steel Inc.

Introduction of BOF Relining Equipments

Ladle Refractory Improvements and Maintenance at Wheeling Pittsburgh Steel

Longer Life in RH With Oxygen Top Blowing System

LTV DHCC Synthetic Slag Practices

Magnesia - Graphite Products in the Steel Industry: Environmental and Recycling Aspects

Model of Inclusion Removal during RH Degassing of Steel

Mould Flow Monitoring at No.3 Slab Caster, Krupp Boesch Stahl AG

Physical Modeling of BOF Slag Splashing

Physical Modeling of Slag Behavior at High Rates of Gas Injection

Prediction of Soluble Aluminum in Titanium Stabilized ULC Grades

Process Improvements in HSLA Calcium-Treated Steels

Progress in Steel Ladle Refractories Techniques

Quality and Operational Benefits of Continuous Tundish Temperature Measurement at British Steel Tees Side Works

Reactive Phosphide Inclusions in Commercial Ferrosilicon

Removal of Copper and Tin in Molten Iron with Decarburization under Reduced Pressure

Slab Caster Design Criteria for High Quality Steel

Slab Width And Length Control At The Burns Harbor Casters

Solidification Control Versus Liquid Steel Temperature - A Review

Steel Composition and Temperature Adjustment: the HALT process at Krupp Hoesch - Dortmund Plant

Stratification and Emptying Flow in Ladles Before and During Casting Creation of Simple Models From Experiments and Sophisticated Models

Temperature Compensation and Control in the Continuous Casting Tundish: Physical and Mathematical Modelling

Temperature Prediction and Control During Continuous Casting

The Conversion of Dofasco's No 1 CC from 254 mm to 216 mm

The Design of Continuous Casting Mold Fluxes Using Empirical Data

The Effect of Deoxidation Praxis on Inclusion Characteristics in Bearing Steel Production

Thermal Modeling as a Tool for Optimization and Control of Casting Processes

Three-phase (steel, slag, gas) modeling of the CAS-OB process

Total Quality Teamworking Reduces Refractories Costs

Vortex Formation and Chaotic Fluiddynamic in Continuous Casting Mould