1960 Electric Furnace Proceedings
Advances in Production of Calcium Carbide
Argon Casting for Improving Steel Quality
Basic Brick Trials in Electric Furnace Roofs
Casting Procedures for FerroaIIoys
Cleanliness Requirements for Type 430 Stainless Strip
Complete Analysis of Basic Open Hearth Bath Samples Using the Quantovac
Considerations in Use of Large Versus Small Carbide Producing Furnaces
Control of Oxidation by Argon Blanket Induction Melting of Low-Alloy and High-Alloy Steels
Controlled Oxygen Blow in Melting of Chromium-Nickel Stainless Steel
Desulphurization of Induction Melted Plain Carbon and Low-Alloy Steels
Desulphurization of Steel by Injection of Magnesium-Lime Mixtures
Desulphurizing Stainless Steel and the Higher Alloyed Metals Under Production Conditions
Effect of FerroaIIoy Quality on Steel Quality
Effect of Vacuum Degassing on Steel Quality
Electric Furnace Bottoms and Their Maintenance
Exothermic Hot Topping Big-End-Down Ingots for Higher Yields
FerroaIIoy Quality and Standardization Vs Steel Quality
Fluid Mold Casting of Forging Ingots
Formation of Nonmetallic Inclusions in Alloy Additives
Future Developments in Electric Furnace Steelmaking
Future Possibilities in Melting
Handling and Utilization of Phosphorus Furnace Slag
Importance of FerroaIIoy Quality in Steelma king
Inclusions in High-Temperature Alloys and Ferritic Steels
Inclusions in Stainless Steels
Manganese-Silicon Ratio and Oxidation Levels in Induction Furnace Melting of Stainless Steel
Manufacture of 75 Per Cent FerrosiIicon in Large Submerged-Arc Furnaces
Manufacture of Simplex Ferrochrome by the Vacuum Process
Metallurgical and Processing Problems in the Manufacture of Stainless 430 Strip
Operation of the Electric Furnace in the Manufacture of Phosphorus
Optimum Desulphurization and Dephosphorization of Steels in Air Induction Furnaces
Oxygen Practice in Stainless Steel at Sharon Steel Corporation
Petrographic Tools and Techniques in the Identification of Nonmetallic IncIusions in Steels
Pressure-Pouring of Steel Castings
Production of Low Gas Content Metal Using Argon Atmosphere
Quality Control Program for Steel Plant Refractories
Quantitative Extraction of Nonmetallic Inclusions From Steel
Reduction of Carbon, Sulphur, and Phosphorus Through Oxidation in Air Induction Melting
Reliability Factors in Steel Usage
Single-Stage Manufacture of Low-Carbon Ferrochromium Silicon
Slag Composition for Air Induction Melting
Standardization of FerroaIIoys
Surnrnary of Direct Reduction Processes As Applied to Electric Furnace Use
Techniques for Desulphurizing Steel in the Basic Electric Furnace
Techniques for the Study of Nonmetallic Inclusions
The Carbon Boil in Air Induction Melting
Use of the Oxygen Gas Burner for Scrap Meltdown in the Small Arc Furnace
Vacuum Degassing of 500-Pound Melts for Carbon Steel castings