1949 Electric Furnace Proceedings
Applications of Temperature Measurements at Duquesne
Bottom and Pouring Refractories
Deoxidation of Low-carbon Rimming and Semikilled Steels Melted in 70-ton Basic Electric Furnaces
Deoxidation Practice for Single-slag Electric-furnace Rimming Steel
Deoxidation Practice on Rimmed and Semikilled Steels
Deoxidation Practice on Rimmed and Semikilled Steels by Steel Company of Canada
Effect of Large Transformers on Rate of Production
Effect of Large Transformers on Rate of Production
Effect of Melting Practice on Hydrogen
Flushing Molten Steel with Neutral Gases
Good Joint-rnaking Practice for Electrode Columns
Handling and Storage of Electrodes
Handling Electric-furnace Supplies at Timken
High-chromium steel in the Acid Arc Furnace
Improved Methods for Handling and Shipping Graphite Electrodes
Inductive Stirring in Arc Furnaces
Information from the Chemical Equation
Manufacture of Rimming Steel in Small Electric Furnaces
Materials Handling in the Electric-furnace Shop
Materials Handling in the Foundry
Measuring Temperature of Molten Steel with Platinum Immersion Thermocouple
Melting Control with the Direct-reading Spectrometer
Obtaining Uniform Bath Composition by Reladling
Optimelt Automatic Recalibrating Control for Arc-furnace Regulators
Precision of Spectrographic Analyses of Steel
Preparation of Scrap for Armco Electric Furnaces
Production of Sea-water Magnesite
Quality of Oxygen-decarbonized Acid Electric Steel
Relative Accuracy and Cost of Using Immersion Thermocouples for Steel-bath Temperature Control
Repairs and Maintenance Materials for Door Frames and Roof Rings on Electric-arc Furnaces
Results of Optimum Current Control on Electric Furnaces
Routine Spectrochemical Analysis in the Ford Motor Company
Sillimanite Roof Refractories in Basic Electric Furnaces
Spectrographic Analysis at the American Cast Iron Pipe Company
Spectrographic Analysis by Copperweld
Spectrographic Analysis of High-alloy Steels
Spectroscopy at Canton Division, Republic Steel Corporation
Techniques Employed in Using Oxygen to Make Carbon Steel for Castings
Temperature Measurement and Fluidity Tests
Temperature Measurement and Temperature Control in Steel Foundries
Temperature Measurement in the Electric Furnace at Atlas Steels Ltd.
Temperature Measurements in the Basic Arc Furnace
Thermal Gradients and Strains during Rapid Cooling of Graphite Electrodes
Use of Oxygen in Melting Stainless Steel