2009 Steel Properties & Applications Conference Proceedings

3D Modelings of White Iron Reinforcement in Mottled Iron Castings

A Simple Model on Dendrite Growth during Steel Continuous Casting Process

A Study of Micro-cracks in Overheated Forgings of Ultra-Low Sulfur Steels for Aircraft Engine Crankshafts

A Tribute to Professor David V. Edmonds on the Eve of his Retirement

Acicular Ferrite Formation And Mechanism Aspects Of A HSLA Steel

Adhesive Bondability of Advanced High Strength Steels with Galvannealed Zinc Coating

An Overview of Recent Developments in Experimental and Numerical Studies for the In-situ Measurement of Large Inclusions (~50-400 microns) in Liquid Steel Processing Vessels.

An Update of Phase Transformations During PWHT of Grade 91

Analysis of a Bucketwheel Stacker Reclaimer Structural Failure

Analysis of Criterion for Ductile Crack Initiation of High Strength Steels under Cyclic Loading

Analysis of HSLA Steel Microstructures by Various Techniques

Application of Oxide Metallurgy (OM) to Improving HAZ Toughness of High Strength Steels

Bainitic Hot Strip Steels Microalloyed with Vanadium

Behavior of MgO·Al2O3 based inclusions in alloy steel during the refining process

Calculating Model Establishing and Application of Nitriding and Denitriding to 304 Stainless Steel in AOD

Combined Effect of Boron, Titanium and Rapid Solidification onMicrostructure of Alloy 800

Comparing the Up Quenching Austempering with Conventional Austemperingon Mechanical Properties of an Ultra High Strength Steel

Considerations of Material Selection for Small-Caliber Gun Barrels

Control of Ultra-low Titanium in Ultra-low Carbon Al-Si Killed Steel

Corrosion and Property Comparison of Ultra-High Strength Alloys

Corrosion Performance of Welds on 6 wt% Mo Superaustenitic Stainless Steels

Degenerate Pearlite And M–A Constituent Formation In The Simulated Coarse-Grained Heat Affected Zone OA C-Mn HSLA Steel

Development of New Steel Grades by Experimental Simulation

Development Of Penstock Steel With Excellent Weldability For Hydroelectric Power Station

Development of Process Technology for Control of Thick Sulphide Inclusions in Sulphur Bearing Steel

Development of steels with advanced damping properties

Development of Vanadium Microalloyed High Strength Hot Strip For Production With Reduced Rolling Forces

Development of Web-based Metal Property and Metal Information Databases

Differences between Physical Water Models and Steel Continuous Casters: A Theoretical Evaluation

Different Hot Working Behaviors Did Not Impede Transition From Wrought Iron To Steel - Explanations, International Histories

Differentiating Ferrite and Martensite in Steel Microstructures Using Electron Backscatter Diffraction

Dynamic Recrystallization of a Nb bearing Al-Si TRIP steel

EBSD Analysis of Warm Multiaxially Forged Mild Steel

Effect of Holding Time before Cool Deformation on Microstructure Evolution and Mechanical Properties of Microalloyed Steels

Effect of Inclusion Morphology on the Fracture Toughness of High Strength Steels

Effect of Inclusions on Machinability of Carbon Steels for Machine Structural Uses

Effect of Matrix Composition on the Corrosion Resistance of Martensitic Stainless PM Tool Steels

Effect of Oxygen Partial Pressure during Annealing on the Selective Oxidation and Galvanizing of a 1.5% Al TRIP-Assisted Steel

Effect of Si, Al and Mo Alloying on Tensile Properties Obtained by Quenching and Partitioning

Effect of Substrate Texture on Coating Phase Formation and Effect of Coating Texture on Coating Formability of Industrially Produced Galvannealed Coated Steels

Effect of the Imposition of Compressive Stress on a Remaining Fatigue Life

Effect of Ti on Charpy Fracture Energy and Other Mechanical Properties of ASTM A 710 Grade B Cu-Precipitation-Strengthened Steel

Effect of TMCP Parameters on Microstructures and Low Temperature Toughness for Acicular Ferrite Pipeline Steels

Effect of Welding Speed on Weld Quality and Microstructure of TandemSubmerged Arc Welded X80 Pipeline Steel

Effects of Cooling Rate, and Cool Deformation on Mechanical Properties and Microstructure of a Hot Rolled Nb-Microalloyed Steel

Effects of Heat Treatment on Microstructure and Mechanical Properties ofBainitic Single- and Complex-Phase Steel

Experimental Study on RH Vacuum Decarburization for Ultra-low-carbon Steels at Baosteel

Formability of Advanced High Strength Steels Determined by Instrumented Hole Expansion Testing

Fracture Mechanical Study on Edge Flange-ability of High Tensile-strength Steel Sheets

Full Scale Combined Load Premium Connection Testing in an H2S Environment

Gallium Content Effects in Low Carbon Steels

High-temperature Properties of Steel L245MB during Slab Continuous Casting Process


Inclusions and Nozzle Clogging during Billet Continuous Casting Process

Influence of Cooling Rate on Microstructure Evolution in a Low Carbon High Strength Microalloyed Dual Phase Steel

Influence of Heat Treatment on the Corrosion and Electrochemical Behavior of Austenitic Stainless Steel

Infrared Thermography of a TMCP Microalloyed Steel Skelp at the Upcoiler

Investigation of Refractory Properties on the Initial Bubble Behavior in the Water Model of Continuous Casting Process

Isothermal Transformation of CMnSi and CMnSiAl Steelsin the MS-Mf Temperature Range

Long-term ageing behaviour of stainless steel cast alloys

Mathematical Description of aaaa’-Martensite Formation and its Application for the Detection of Damage in Sheet Metal

Microstructural Evolution and Grain Refinement of a High Strength Low Alloy Steel Produced by Compact Strip Production

Microstructural Evolution and Mechanical Properties of Welds in a New High Strength Steel

Microstructural Evolution and Strain-Hardening of Fe-30Mn duringTensile Deformation

Microstructure and Mechanical Properties of Ni-added High Strength Steels Subjected to Quenching and Partitioning (Q&P) Heat Treatment

Microstructure and Microtexture as a Function of Grain Size in a 301LN Stainless Steel

Modeling and Removal of Inclusions in Continuous Casting

Modification of Spinel Inclusions by Calcium in Liquid Steel

New Method of Characterizing and Quantifying Complex Microstructures in Steels

New Rail Steels for the 21st Century

Operational safety assessment of 1940s cast steel pulleys

Optimization of Calcium Treatment to Improve Cleanliness of Cast Steel

Overheat Forging Studies of Ultra-Low Sulfur Steels

Particle Stimulated Nucleation of Ferrite in Microalloyed Steel

Preventing Dissimilar Metal Weld Failures: Application of New Functionally Graded Transition Joints

Prior Austenite reconstruction in Friction Stir ProcesseAPI X65 Steel using OIMTM

Reduction of Slivers DueTo Nonmetallic Inclusions inContinuous Casting

Research into an Original 600MPa Galvanizing Dual Phase Steel with high amount of Aluminum

Simulating Fabrication of Advanced High Strength Steel Tubes using PressForming and High Frequency Induction Welding

Structures of Horizontally Continuously Cast Steel Billets

Study on Ti-Bearing Low Carbon Bainitic Steel with 900 MPa Yield Strength

Subgrain Texture Evolution during Biaxial Deformation in Interstitial Free and Dual Phase Steels


The Corrosion Protective Effectiveness of Metal Coated Steel Reinforcement in Concrete

The Development of Optimum Modes in Rolling and Postdeformation

The effect of aging heat treatment on the wear behavior of Copper Aluminualloys and its stainless steel fiber Composites

The Effect Of Carbon Content On The Microstructure And Mechanical Properties Of High-Mn Steels

The Effect of Processing Conditions and Cooling Rate on API X-70 and X-100 Grade Steels

The Effect of Welding Speed on the Impact and Tensile Properties of SA516 Grade 70 Steel

The Formation of Abnormal Ferrite in Hypereutectoid Steels Revisited and Its Analogy to the Formation of Austenite and Ferrite Shells Around Graphite in Cast Irons

The Role of Gas Shrouded Ladle Nozzles in Affecting Steel Quality within a Tundish

Thermal Spray Coating of Galvanizing Rolls

Thermodynamic Analysis of Selective Oxidation Behavior of Si and Mn-added Steel during Recrystallization Annealing

Thin-Walled, Low-Alloy Steel Structures Produced Through the Gas Carburization of Fully Reduced Metal-Oxide Powder Mixtures

Transient Phenomena of Fluid Flow and Inclusion Motion in Continuous Casting Strands

Unsteady State Hardness Prediction of Industrial Quenched Steel Bar [One and Two Dimensional]

Using Simulated Cooling Profile from Computational Simulation Technique for Chilled Structures Prediction in Thick Section Casting

Water Model Simulation for Flow State in Slab Continuous Casting Mold

Weld HAZ Simulation ofXlOO Pipe Steel

Weldability of a 700MPa Grade Low Carbon Bainitic Steel Produced by CSP